Function is introduced:

1. To detect and establishment of electronically controlled high pressure pump pressure seal performance test, judging whether there is a high pressure pump failure.

2. Used to detect the rotor type electronically controlled high pressure pump flow stability.

3. The in-line type high pressure electric pump flow uniformity test.

4. Can test whether the rail pressure sensor failure, and linearity.

5. Whether testing pressure common rail pressure limiting valve is leaking and high pressure to bear ability.

6. Fuel measurement can be detected if there is a binding and coil is burned.

7. May be started in the engine running state on-line detection, idle speed, medium speed, high-speed rail pressure judge fault maintenance personnel.

8. Available in different engine speed rail pressure under control, such as start working condition, working condition of medium and high speed conditions, the idle speed

功能介紹：

1. 用于檢測電控高壓泵壓力建立及密封性能測試，判斷高壓泵是否存在故障。

2. 用于檢測轉子式電控高壓泵流量穩定性。

3. 直列式高壓電控泵缸位流量均勻性檢測。

4. 可測試軌壓傳感器是否失效，及線性度。

5. 檢測共軌壓力限壓閥是否存在泄漏及高壓承受能力。

6. 可檢測燃油計量法是否存在卡滯及線圈是否燒毀。

7. 可在發動機運行狀態中在線檢測啟動、怠速、中速、高速軌壓幫助維修人員判斷故障。

8. 可在發動機不同轉速下控制軌壓，如啟動工況、怠速工況、中速工況、高速工況高壓共軌噴油器控制儀表 電噴高壓共軌油嘴檢測實驗設備 一三八五四八二二三九五 EUI電噴油泵油嘴檢測試驗儀表

噴油泵試驗臺 高壓共軌噴油器試驗臺 電控歐三共軌試驗臺 卡特彼勒 泵噴嘴油泵油嘴試驗臺生產廠家 提供數據 及技術培訓 標準試驗臺測試